Summary of A Victim Essay Example

Summary of A Victim Essay In Bruno Bettelheim’s A Victim, his purpose is to prove that the victim has as much control over a situation as the aggressor. He demonstrates that if one does not act like a victim, then one will not be treated as a victim. Bettelheim also proves that if a person does not behave in an expected way then one can not stereotype them (Bettelheim 57). Bettelheim makes the point that the victim acts in ways that are just as annoying as the aggressor’s actions. Attention is not brought to it because it is easier to say if the aggression will come to a stop, then the person getting victimized reactions will change. He explains that will not always happen, because the victim and aggressor are interlocked. They both have the same effect on each other, and no one assumes that the victims actions play a role on the aggressor’s reaction (57). Bettelheim’s next point is if one does not act like a victim then one will not be treated as a victim. Because he does not beg or act like there was such a difference in him and the guard, he is not acting as the rest of the victims. It is shocking to the guard, his expectations of the Jewish people is not how this man is acting, and he lets the man through to get further treatment. Since the man does not act like a victim, it is hard for the guard to treat him as one (58). â€Å"Since I did not act as the dangerous Jew was expected to, I did not activate the anxieties that went with his stereotype† (58). We will write a custom essay sample on Summary of A Victim specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Summary of A Victim specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Summary of A Victim specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Bettelheim’s main purpose, is that the victim has as much control over a situation as the aggressor.

Free Essays on Internet Usage

"The Communications Decency Act is an amendment which prevents the information superhighway from becoming a computer "red light district." On June 14, 1995, by a vote of 84-16, the United States Senate passed the amendment. It is now being brought through the House of Representatives.1 The Internet is owned and operated by the government, which gives them the obligation to restrict the materials available through it. Though it appears to have sprung up overnight, the inspiration of free-spirited hackers, it in fact was born in Defense Department Cold War projects of the 1950s.2 The United States Government owns the Internet and has the responsibility to determine who uses it and how it is used. The government must control what information is accessible from its agencies. This material is not lawfully available through the mail or over the telephone, there is no valid reason these perverts should be allowed unimpeded on the Internet. Since our initiative, the industry has commendably advanced some blocking devices, but they are not a substitute for well-reasoned law.4 Because the Internet has become one of the biggest sources of information in this world, legislative safeguards are imperative. The government gives citizens the privilege of using the Internet, but it has never given them the right to use it. They seem to rationalize that the framers of the constitution planned & plotted at great length to make certain that above all else, the profiteering pornographer, the pervert and the pedophile must be free to practice their pursuits in the presence of children on a taxpayer created and subsidized computer network.3 People like this are the ones in the wrong. Taxpayer's dollars are being spent bringing obscene text and graphics into the homes of people all over the world." Computer, Internet, Privacy INTERNET REGULATION: POLICING CYBERSPACE The Inte... Free Essays on Internet Usage Free Essays on Internet Usage "The Communications Decency Act is an amendment which prevents the information superhighway from becoming a computer "red light district." On June 14, 1995, by a vote of 84-16, the United States Senate passed the amendment. It is now being brought through the House of Representatives.1 The Internet is owned and operated by the government, which gives them the obligation to restrict the materials available through it. Though it appears to have sprung up overnight, the inspiration of free-spirited hackers, it in fact was born in Defense Department Cold War projects of the 1950s.2 The United States Government owns the Internet and has the responsibility to determine who uses it and how it is used. The government must control what information is accessible from its agencies. This material is not lawfully available through the mail or over the telephone, there is no valid reason these perverts should be allowed unimpeded on the Internet. Since our initiative, the industry has commendably advanced some blocking devices, but they are not a substitute for well-reasoned law.4 Because the Internet has become one of the biggest sources of information in this world, legislative safeguards are imperative. The government gives citizens the privilege of using the Internet, but it has never given them the right to use it. They seem to rationalize that the framers of the constitution planned & plotted at great length to make certain that above all else, the profiteering pornographer, the pervert and the pedophile must be free to practice their pursuits in the presence of children on a taxpayer created and subsidized computer network.3 People like this are the ones in the wrong. Taxpayer's dollars are being spent bringing obscene text and graphics into the homes of people all over the world." Computer, Internet, Privacy INTERNET REGULATION: POLICING CYBERSPACE The Inte...

Analysis of United States based television networks that service the Research Paper

Analysis of United States based television networks that service the U.S. Hispanic market - Research Paper Example On the other hand, Latino is considered broader term including different ancestries like Spanish, Brazilians etc. Thus, it can be concluded that Hispanics just involve Spanish- speaking persons from Latin America excluding Portuguese speaking Brazilians. According to the census of 2010, South America has about 85, 000 Spanish Americans in its total population composition. Most of the Hispanic population resides on the eastern parts of United States whereas Latinos prefer to have their accommodation on the western ends. As far as the total population of the United States is concerned, Hispanics constitute 16.7% of the total population and form the largest group based on ethnicity next to White Americans- a group of people composed of various other sub- groups like Latinos, Hispanics, Cuban Americans, Mexican, Colombian, Puerto Ricans, Dominican, Salvadorans and Spanish. So, just after the Native Americans, it can be well said that Hispanics are the second largest American ethnic group having roots in European ancestry. In the beginning of their arrival in U. S. Hispanics prefer to live in the Southwestern regions. Later on, in 1598, they had permanent settlements in New Mexico. In 1680, this area was transferred to Texas. However, again in 1692, Hispanics resumed their settlements in New Mexico. However, at the same time, new ones were also established in California and Arizona in the beginning of eighteenth century. Puerto Rico is believed to be the oldest settlement of early Spanish in United States. Source: (Ahaa, pars. 1) Source: (Ahaa, pars. 2) Source: (Jeffrey, pars. 1) The Significance of Media in the Lives of Hispanic Americans United States has a huge market as far as media and programming is concerned. There are hundreds and thousands of media outlets in America including commercial as well as non- commercial networks for broadcasting, advertising and marketing. Low-power Radio networks facilitating the listeners and millions of magazines are also circ ulating on daily basis. The Hispanic oriented and the most noteworthy media outlets include, Univision: This is considered the largest television network in Spanish language in the United States of America. This television network has several affiliates in the U. S. market and many international affiliates as well. Telemundo: The second largest television network in Spanish in U. S. is Telemundo having several national and international affiliates. Azteca America: Another popular television network in Spanish with affiliates in every major market of United States. Numerous international affiliates also exist, mun2: This is a cable network that extensively produces programs and content for audiences with Hispanic American and Latino origins. ConSentido TV: It is also a popular television network, newspaper and radio service that covers Hispanic audiences especially reside in North Texas. TBN Enlace, USA: It is a Christian television network which has its broadcast in Spanish language . This network is based in the state of California. 3ABN Lation: Another addition among the television networks especially focused on the programs that are specifically generated for Hispanic Americans. V-me: This network belongs to PBS network and it’s a Spanish television network. CNN: This television network is based in Atlanta: Georgia. It is a Spanish language news network.

Intelligent Life Essay Example | Topics and Well Written Essays - 500 words - 1

Intelligent Life - Essay Example Thirdly, aliens may actually have a totally different type of sensory organs and thus build a different experience from humans (Gertz). Fourthly, aliens may positively respond to European classical music, although no clear reason was given by NASA regarding this (Coplan). Thus, because of the aforementioned considerations, the artifact must not be something made of sounds especially loud rock music. It must not be something that may crudely represent anger or conflict, and it must be unique and different from the surrounding environment so that it could be sensed. Moreover, according to NASA’s most recently published book entitled Archaeology, Anthropology and Interstellar Communication, communication between humans and extraterrestrials theoretically needs something like a â€Å"highly elaborated code† that will serve as an â€Å"abstract artificial mediation† (Lestel 231). Still, from the NASA book, one learns that it can be assumed that â€Å"brains are not completely isolated cognizers processing concepts in relation to sensory data [but] as spread out in space and time and among other cognizers† (Edmondson 239). Moreover, the best form of communication can be a â€Å"three-color image†¦arranged in a grid† and that one should think that other beings are â€Å"altruistic† (Edmondson 244). This means that the artifact must contain a code of any three colors, and Earth should hope that the aliens can perceive it and can perceive our need for this artifact to be perceived. Thus, firstly, based on all the aforementioned ideas regarding human and extraterrestrial communication, the artifact should be something like a piece of heavy metal that should be different from the rest of the metals in space. Perhaps, an alloy like steel should be used in order that it remains unique when compared with the rest of the material in space and so that the aliens can identify it. It could also be made up of a heavy Styrofoam if possible, as long as it is not too

The Desert Rat-Kangaroo Essay Example | Topics and Well Written Essays - 1000 words - 179

The Desert Rat-Kangaroo - Essay Example Although the desert environment is harsh, the desert rat kangaroo had adapted to the conditions and survived in the ecosystem until interference in its natural habitat contributed majorly to its extinction. Humans were both directly and indirectly involved in the alteration of the mammal’s natural habitat by introducing herbivores such as rabbits and cattle, setting off an imbalance in the ecosystem. Fire regimes also played a key role in the destruction of the habitat (Fisher & Blomberg, 2010). Although the rat kangaroo was largely independent of water, there was increased competition for green plant with beetles. Other factors for its extinction include predation by foxes and cats. Since they were relatively small and hence vulnerable to predators, much of their self defense was in the ability to make high and quick leaps. The extinction of the desert rat kangaroo did not impact on the desert food chain significantly mainly because it was a replaceable species. More importan tly, they were not direct competitors of surface water with any other species because all their water requirements were met by the water contained in the green plants in their diet. Being herbivorous animals, their role in the ecosystem was gradually assumed by cattle as the rat kangaroo’s population diminished. However, the population of beetles, weevils and other small insects of which the rat kangaroo was a key consumer increased. The most notable difference was a decline in the number of desert fox (Fisher & Blomberg, 2010). The orangutan is a primate that depends entirely on forests for survival. Unfortunately, high illegal and legal logging and deforestation rates are contributing to its increasingly endangered status.

Algorithms for pre-processing and processing stages of x-ray images

Algorithms for pre-processing and processing stages of x-ray images 1.1 Introduction This chapter presents algorithms for pre-processing and processing stages of both cervical and lumbar vertebrae x-ray images. Pre-processing stage here is the process of locating and enhancement the spine regionof interestin the x-ray image, where the processing stage includes the shape boundary representation and segmentation algorithms based feature vectors extraction and morphometric measurement. In this research the spine vertebrae are introduced and the objectives of segmentation algorithm are discussed. Then various general segmentation approaches including those based on the shape boundary extraction are discussed and applied to our spinal x-ray image collection. The current approach is introduced with a flow diagram and then the individual blocks of the segmentation process are taken up and discussed in detail. 1.2 Image Acquisition A digital archive of 17,000 cervical and lumbar spine x-ray images from the second National Health and Nutrition Examination Survey (NHANES II) is maintained by the Lister Hill National Center of Biomedical Communications in the National Library of Medicine (NLM) at the National Institutes of Health (NIH). Among these 17,000 images, approximately 10,000 are cervical spine x-rays and 7,000 are lumbar x-rays. Text data (including gender, age, symptom, etc.) are associated with each image. This collection has long been suggested to be very valuable for research into the prevalence of osteoarthritis and musculoskeletal diseases. It is a goal of intramural researchers to develop a biomedical information resource useful to medical researchers and educators. Figure 3.1 shows two sample images from the database. Spine x-ray images generally have low contrast and poor image quality. They do not provide meaningful information in terms of texture or color. Pathologies found on these spine x-ray images that are of interest to the medical researchers are generally expressed along the vertebral boundary. (a) (b) 1.3 Proposed segmentation scheme The proposed process main stages scheme shown at Figure3.2, followed by a details review of the used methods applied to our spinal images and can be listed as follow: a. Pre-processing stage include image acquisition, region localization (RL) and region localization enhancement. b. Shape boundary representation and segmentation stage; include active shape model (ASM) segmentation based on two shape boundary representation 9-anatomical points and b-spline representation. c. Feature extraction stage; include feature extraction based shape feature vector and morphometric measurement-invariant features for indexing. d. Classification and similarity matching stage; include feature models classifier and similarity matching for diagnosis and retrieval 1.4 Pre-processingstage 1.4.1 Spineregion localization Region localization (RL) refers to the estimation of boundaries within the image that enclose objects of interest at a coarse level of precision. RL is important for assisting human experts in rapid image display and review (independent of its use in initializing a segmentation process). For example, with an algorithm that can rapidly, and with high probability identify the spine region with a marked line passing, this region of interest can be automatically zoomed on the display even though the location and orientation of the spine may vary appreciably in these images. This algorithm assumes that a line passing through the maximum amount of bone structure in the image will lie over a large part of the spine area, given a line passing through the image; Figure 3.3 shows the region localization (RL) selection of both cervical and lumbar images. (a) (b) 1.4.2 Enhancement approach Image enhancement is significant part of AVFAS recognition systems. Changes in lighting conditions produces dramatically decrease of recognition performance, if an image is low contrast and dark, we wish to improve its contrast and brightness. The widespread histogram equalization cannot correctly improve all parts of the image. When the original image is irregularly illuminated, some details on resulting image will remain too bright or too dark. Typically, digitized x-ray images are corrupted by additive noise and de-noising can improve the visibility of some structures in medical x-ray images, thus improving the performance of computer assisted segmentation algorithms. However, image enhancement algorithms generally amplify noise [17, 18]. Therefore, higher de-noising performance is important in obtaining images with high visual quality for that reason different enhancement techniques was implemented i. Adaptive histogram-based equalization ( Filter 1) Adaptive histogram-based equalization (AHE) can be applied to aid in the viewing of key cervical and lumbar vertebrae features, and its an excellent contrast enhancement method for medical image and other initially no visual images. In medical imaging its automatic operation and effective presentation of all contrast available in the image data make it a competitor of the standard contrast enhancement methods. The goal of using adaptive histogram equalization is to obtain a uniform histogram for the output image, so that an optimal overall contrast is perceived. However, the feature of interest in an image might need enhancement locally. Adaptive Histogram Equalization (AHE) computes the histogram of a local window centred at a given pixel to determine the mapping for that pixel, which provides a local contrast enhancement. However, the enhancement is so strong that two major problems can arise: noise amplification in flat regions of the image and ring artifacts at strong edges [12, 13]. Histogram equalization maps the input images intensity values so that the histogram of the resulting image will have an approximately uniform distribution [9-11].The histogram of a digital image with gray levels in the range [0, L-1] is a discrete function Where is the gray level, is the number of pixels in the image with that gray level, is the total number of pixels in the image, and k =0, 1, 2 L-1, basically gives an estimate of the probability of occurrence of gray level The local contrast of the object in the image is increased by applied histogram equalization, especially when the applied data of the image is represented by close contrast values. Through this adjustment the intensity can be better distributed on the histogram, this allows for areas of lower local contrast to gain a higher contrast without affecting the global contrast. (a) (b) ii. Adaptive contrast enhancement The idea is to enhance contrast locally analyzing local grey differences taking into account mean grey level. First we apply local adaptive contrast enhancement. Parameters are set to amplify local features and diminish mean brightness in order to obtain more contrast resulting image. After that we apply histogram equalization. Adaptive gamma value Gamma correction Gamma correction operation performs nonlinear brightness adjustment. Brightness for darker pixels is increased, but it is almost the same for bright pixels. As result more details are visible. 1.5 Shape boundary segmentation Shape boundary segmentation presented at this work is a hierarchical segmentation algorithm tailored to the segmentation of cervical and lumbar vertebrae in digitized x-ray images. The algorithm employs the both shape boundary representation schemes, 9-anatomical points representation (9-APR) and B-spline representation (B-SR) to obtain a suitable initialization for segmentation stage that utilize active shape models (ASMs) proposed by Cootes et al. The advantage of using ASMs in medical image segmentation applications is that rather than creating models that are purely data driven, ASMs gain a priori knowledge through a thorough observation of the shape variation across a training set. 1.5.1 Shape boundary representation Shape is an important characteristic for describing pertinent pathologies in various types of medical image and its a particular challenges regarding vertebra boundary segmentation in spine x-ray images. It was realized that the shape representation method would need to serve the dual purpose of providing a rich description of the vertebra shape while being acceptable to the end user community consisting of medical professionals. In order to model the spinal vertebra shape we presented by term of set points chosen to place point around the boundary , this must be done for each shape at training stage and the labelling point its important. Two schemes list has been used at this stage to determine a vertebra boundary shape in terms of list points i. 9-anatomical point representation (9-APR) We obtained segmentation data created by medical expertise at an early state of our segmentation work; the purpose of this task was to acquire reference data as a guideline for validating vertebrae segmentation algorithms. These data consisted of (x, y) coordinates for specific geometric locations on the vertebrae; a maximum of 9-anatomical points representation (9-APR) assigned and marked by board certificate radiologist that is indicative of the pathology found to be consistently and reliably detectable per vertebra were collected . Figure 3.7 shows below the points were placed manually on each vertebrae and which is the interest to medical researchers. Points 1, 3, 4, and 6 are indicative of the four corners of the vertebral body as seen in a projective sagittal view. Points 4 and 3 mark the upper and lower posterior corners of the vertebra, respectively; Points 6 and 1 mark the upper and lower anterior corners of the vertebra, respectively. Points 5 and 2 are the median along the upper and lower vertebra edge in the sagittal view; Point 8 is the median along the anterior vertical edge of the vertebra in the sagittal view. Note that Points 7 and 9 mark the upper and lower anterior osteophytes, so if osteophyte(s) are not present on the vertebra, then these points (7-9) coincide with points 6 and 1, respectively. ii. B-spline representation (B-SR) Representation of curves using piecewise polynomial interpolation to obtain curves is widely used in computer graphics .B-spline are piecewise polynomial curves whose shape is closely related to their control polygon a chain of vertices giving a polygonal representation of curves. B-splines of the third order are most common because this is the lowest order which includes the changes of curvatures. The Advantage of using B-spline techniques at this research is to enhance the 9-anatomical points, B-spline curves require more information (i.e., the degree of the curve and a knot vector) and a more complex theory than Bà ©zier curves. But, it has more advantages to offset this shortcoming. * B-spline curve can be a Bà ©zier curve. * B-spline curves satisfy all important properties that Bà ©zier curves have. * B-spline curves provide more control flexibility than Bà ©zier curves can do. * The degree of a B-spline curve is separated from the number of control points. More precisely [ReF]. We can use lower degree curves and still maintain a large number of control points and also we can change the position of a control point without globally changing the shape of the whole curve (local modification property). Since B-spline curves satisfy the strong convex hull property, they have a finer shape control. Moreover, there are other techniques for designing and editing the shape of a curve such as changing knots. B-spline is a generalization of the Bezier curve [Ref] , let a vector known as the knot vector be defined, Where, is a no decreasing sequence with and define control points, Define the degree as ,The knots are called internal knots. 1.5.2 Modelling Shape Variations In ASM, an object shape is represented by a set of landmark points and requires a good initialization of an objects pose in an image (i.e., location, size, and angle of rotation); therefore, we used the two schemes representation (9-APR B-SR) in our proposed segmentation technique to create this initialization. Several instances of the same object class are included in a training set and in order to model the variations we need to align the set of shapes. i. Training set In order to build a model that is flexible enough to cover the most typical variations of vertebrae, a sufficiently large training set has to be used. For the purpose of the investigation reported in this work, we locate the shape (by eye) and its important that the two schemes representations are accurately located and that there is an exact correspondence between labels in different instances of training shapes. In this research a set of 1100 vertebra for both cervical (400 vertebral) and lumbar (710 vertebra) has been used. ii. Aligning trainshapes The model that will be used to describe a shape and its typical appearances is based on the variations of the spatial position of each landmark point within the training set. Each point will thus have a certain distribution in the image space and therefore the shape model is being referred to as a Point Distribution Model (PDM). In order to obtain the PDM, we use the two shape representation, to align the shapes, and finally, to summarize the landmark variations in a compact form. In what follows, these steps are being described in some detail. We achieve the required alignment by scaling, rotating and translating the training shapes so that they correspond as closely as possible. 1.7 Shape boundary Indexing The shape analysis described here is related to the statistical analysis of vertebrae shapes to shape similarity matching and recognition. Three schemes of shape analysis implemented at this stage. First scheme is the shape analysis based feature vectors extraction includes statistical shape feature (SSF) and Gabor wavelets features (GWF). Second scheme is the shape analysis based morphometric measurement based angles measurement index (AMI) and intra-bone ratio measurement (IBRM). Last is the analysis based similarity matching, the index output result from each analysis will be considered as input to the classifier systems those schemes outlined are described below. Feature vector is an n-dimensional vector of numerical features represents object shape. Statistical models captured from active shape model, Gabor wavelets filter bank require a numerical representation of vertebrae shape based on both boundary shape representation (9-anatomical point model ,B-spline curve), since such representations facilitate processing and statistical analysis. Figure below shows schematic pattern recognition system based feature vectors. 1.7.1 Statistical shapefeatures(SSF) Each vertebral in the training set, when aligned can be represented by a single points in 2n dimensional space (eq2).Thus a set of N example shapes gives base on each shape boundary representation cloud of N point in this 2n dimensional space. We assume that these points lie within some region of the space which call the Allowed Shape Domain and that the points give an indication of the shape and size of this region. Every 2n-D point within this domain gives a set of landmarks whose shape is broadly similar to that of those in the original training set. Thus by moving about the Allowable shape domain we can generate new shapes in systematic way .The approach given below attempts to model the shape of this cloud in high dimensional space and hence to capture the relationship between the positions of the individual landmark points. 1.7.2 Gabor wavelets features(GWF) The objectives of this stage is to explore the feasibility of using Gabor wavelet-constructed spatial filters to extract feature-based vector from shape boundary consisting of cervical and lumbar vertebrae, and to use these extracted feature vectors to train and test with different classifier. To evaluate the robustness of the method, so many analysis based filter and mask size was experimented to select the suitable Gabor mask that will be convolute with the two vertebra shape boundary extracted. In order to briefly describe Gabor wavelets and provide a rationale for this stage of work, the Short Time Fourier Transform (STFT) and Gabor Transform need to be explained first. The Fourier transform is a fundamental tool of classical signal analysis. i. Gabor wavelets filter bank The Gabor wavelet function used in this research for AOs feature extraction was same as Naghdy (1996) used and was defined. Where: the different choices of frequency j and orientation constructed a set of filters. ii. Filter frequency and mask size analysis As the frequency of the sinusoid changes, the window size will be changed. (Fig. 3.28, 3.29, 3.30 and 3.32) shows real and imaginary parts of eight two-dimensional wavelets filters. When j is changed from 1 to 4, the sinusoid frequency is reduced whereas the Gaussian window size increases. In comparison, for the Gabor transform, Gaussin window size will remain same. iii. Convolution vertebral region with the filter bank The elementary Gabor wavelet functions were used to construct spatial domain filters, Each filter was made of a pair of filters, which were the real and imaginary part of the complex sinusoid. These pair was convolved with the green channel signal of texture image separately. The reason of choosing the green channel to do convolution was that the green channel was found to have the best texture quality, which means the best contrast level between plants and soil, among red, blue and MExG channels. This scenario is absolutely sensor dependent and may not be the case for other sensors. For one frequency level, the filtering output was the modulation of the average of the convolution output from real and imaginary filter masks on all convolved pixels in the green channel image, which was computed. iv. Gabor wavelets filer bank block diagram 1.8 Shape boundary morphometric measurement 1.8.1 Morphometric measurement-invariant features For efficient image retrieval, it is important that the pathological features of interest be detected with high accuracy. In this stage of Automatic Vertebral Fracture Assessment System techniques, new morphometric measurement-invariant features were investigated for the detection of anterior osteophytes, including lumbar and cervical vertebrae. The goal in this stage of work is to investigate a measurement algorithm for high accuracy and avoid the complex calculation. Two approaches morphometric measurement-invariant features were developed based: 1) Angles invariant features (A-IF) 2) Intra-distance ratio invariant features (ID-IF) The results of this morphometric extraction geometries calculation will produce a signal of two index based on angle and distance measurement that can be used to distinguish between the anterior osteoporosis classes and their severity implemented as input for classifier algorithm. Figure below show the block diagram of the shape analyses based morphometric technique. Stage 1: AOs detection Two classification schemes for anterior osteophytes were established by a medical expert to evaluate the accuracy of the PSM algorithm. The first is Macnabs classification, established by Macnab and his coworkers in 1956 on radiological and pathological bases [6, 7].Two types of osteophytes are adapted from Macnabs classification: claw and traction, as shown in Figure 1. Their visual characteristics are: 1. Claw spur rises from the vertebral rim and curves toward the adjacent disk. It is often triangular in shape and curved at the tips. 2. Traction spur protrudes horizontally, is moderately thick, does not curve at the tips, and never extends across the intervertebral disk space. The second classification is a grading system which was defined by the medical expert consistent with reasonable criteria for assigning severity levels to anterior osteophytes (AO). Three grades of AO are slight, moderate, and severe, also shown in Table 1. Their visual characteristics are: 1. Slight grade includes normal, where the corner angles on the vertebral boundary are approximately right angles. It may have a slight protuberance, where the tip of the osteophyte is round and no narrowing is observed at the base of the protuberance. 2. Moderate grade is characterized by evident protuberance from the ideal horizontal or vertical edge of the vertebra. The bounding edges of the AO form an angle of at least 45 degrees and the osteophyte has a relatively wider base than severe grade. 3. Severe grade is characterized by presence of hook, the angle is less than 45 degrees and has a narrow base, or protrudes far (about 1/3 of the length of the horizontal border) from the normal (ideal 90 degree) vertebral corner. Angles invariant features (A-IF) We explore three main angles for measurement that make sense of difference between the AO classes from the 9-anatomical landmarks model. Shape below show the angle of interest selected that will be used next as input for our classifier system to make decision (a) Turning Angle (b) Intra-Distance Across the Shape Turn Angle (TA) To capture the characteristics of shape in local regions, we use two different features. The first is Turn Angle (TA). Turn Angle is also called Turning Angle or Bent Angle. It is defined as follows [3]: if the points on the polygon are ordered in the counterclockwise direction, and the polygon is traversed in this direction, the Turn Angle is the angle between the direction vector for the current polygon segment and the next one; the sense of the Turn Angle is calculated such that a clockwise turn gives a negative angle whereas a counterclockwise turn gives a positive angle. Figure 3 (a) shows an example. For an arbitrary shape, the Turn Angle feature could be calculated from the approximating polygon for that shape. Turn Angle for a polygon with n vertices is simply a vector in Rn . For example, if the vertebra is represented as a polygon with 72 vertices (our sparse representation), the Turn Angle is a 72-element vector. If the polygon has the concept of an initial vertex, similarity computation is straightforward, e.g., with a Euclidean metric. If there is no initial vertex, similarity between two shapes may be computed by a combinatorial comparison of distances between possibly-matching sets of vertices. This computation may be optimized by dynamic programming. Intra-distance ratio invariant features (ID-IF) Distance across the shape [4] is another local shape feature. DAS is defined, for each vertex P in a polygon, as the length of the angle bisector at P, measured as the line segment from P to the intersecting side of the polygon. For Example, the interior bisector of angle à ¢Ã‹â€ Ã‚  P2P3P4 in the figure 3 (b) intersects the contour at point I3. The length of P3I3 is the DAS at point P3. If the bisector intersects the shape multiple times, the distance to the closest intersection is used. Similarly as for turn angle, if we represent the vertebra shape as a polygon with 72 sample points, the DAS feature may be calculated on those 72 points. Where, V: is called as vertical angle calculated between the points 7-8-9 H: is called as horizontal angle calculated between the points 1-2-3 C: is called as corner angle calculated between the points 8-9-1 Angle formula calculation between these three points coordinates as follow 1.9 Operation Step 1: Calculate the Horizontal angle and this calculation based on the Step 2: Calculate the Horizontal angle and this calculation based on the Step 3: Calculate the Horizontal angle and this calculation based on the Step 4: build the rule base and evaluate the result by visual inspection Intra-Distance ratio Measurement (I-DRM) Inter-bone ration is another morphometric measurement issue, it was explored based on the shape distance here we focused Where, : Represents the distance posterior height calculated between the points 3-4 : Represents the distance medial height calculated between the points 5-2 : Represents the distance interior height calculated between the points 1-6 : Represents the distance calculated between the points 8-mp, where mp Midpoint between the points 3-4, the Midpoint (mp) coordinates calculation formula as the following: With; (, ) is the point 3 coordinate, (,) is the point 4 coordinate Given the two points (, ) and (,), the distance between these points is given by the formula: The normal vertebra was estimated to have the following ratio distance Distance () =Distance () =Distance () Base on this estimation by expert radiologist we develop another rule base decision system that can work properly to and true classify the normal and abnormal and bone The criteria of the X= Stage 2: AOsLocation Detection of the Ao position conduct us to determine the location either upper or lower AO a) b) The position of the AO is determined by sample way calculation based of angles too Stage 3: Disc space narrowing (DSN) Stage 4 Stage 5:Subluxation/Spondylolisthesis Segmentation and Pre-processing The vertebra shapes were segmented using an active contours method modified to constrain evolving contour points to follow orthogonal curves [18], to avoid convergence to a self-intersecting solution contour at vertebra corners [9]. The solution contours have 36 points. Nine of these 36 points were distinguished as geometrical or anatomical reference points, with relative locations that are approximately constant across the veterbra shapes. The nine points, shown in Figure 2 were either manually marked by experts, or extracted automatically or semi-automatically by specialized algorithms [9]. For the current work, we preprocess these segmented shapes by curve smoothing (to reduce noise), fitting (for smoothness), interpolation, and re-sampling (for larger number of evenly distributed points) to obtain the final shape contour description. The curve fitting and interpolation are done with the natural cubic spline algorithm. Then the shape contour is resampled by equal arc length sampling. Finally, the vertebra whole shape is represented by two boundary point sets with different resolutions. The dense sampling set contains 180 points, and the superior and the inferior anterior corners are represented by 60 points, respectively. The sparse sampling set contains 72 points, with the superior and the inferior anterior corners represented by 25 points, respectively.

Norman Mailers An American Dream: The Character of Steven Rojack :: essays papers

Norman Mailer's An American Dream: The Character of Steven Rojack In almost every genre of literature there is the classic antagonist, and the classic protagonist. When examining these characters, there are certain guidelines which authors follow. However, there are times in literature when the classic guidelines are broken, and a new prototype emerges. Contemporary writer Norman Mailer broke the mold of the classic character(s) when writing the novel, An American Dream. In An American Dream, there is no set protagonist or antagonist. In fact, Mailer has taken these two separate identities and merged them into one character. The product is the main character of the novel, Steven Rojack. Throughout the novel the reader isn't sure if they want him to succeed, or fail. This is due to Rojack's ever-changing personality. He first seems like the perfect man, a decorated war hero who knows all the right people. However, shortly after this impression is made another is formed. He murders his wife in cold blood and lies to the police, claimi! ng she committed suicide. As the novel continues however, Rojack realizes the horror of his crime and even confesses what he has done to a woman he loves. Due to the realization of his crime, he is redeemed in the eye of the reader. From this point on, the reader wants Rojack to succeed. However, before final judgement can be passed, it is imperative that Rojack^s entire character be explored. Steven Rojack is first introduced as a prominent man in society who becomes recognized due to his decoration in military service. Through this service he became close with many famous politicians, Jack Kennedy being one. It is through Jack that Rojack meets his first wife, Deborah, a woman who he describes ^would be bored with a diamond as big as the Ritz^ (1) After serving a term in Congress, he and Deborah marry. Unfortunately, the relationship they have is one in which Deborah has full control. As he continues to describe the relationship with his wife it is often filled with bitter memories. He remembers going to parties where she would compare his worth to that of another man^s. It is from this that a bitter hatred stems towards Deborah. Finally, after seven years of marriage, they separate. However, after the separation, Deborah^s needs are still covered by Steven, who is now a college professor and the host of a popular TV show. In addition to this Deborah main! tains a close contact with him, seeing him whenever she desires.

Billboard Advertising Essay

In the event of choosing the most effective way to market your company, I believe that using billboard advertising is the best way to invest your money. Do you ever wonder if you’re really getting the most out of your marketing campaign? In all of those mediums, your ad is there one day (or month) and gone the next†¦with little lasting impression unless you remarket through that medium. In our technology-driven media environment in which the consumer has access to satellite radio, cable or satellite TV, the internet and numerous print media outlets, the visibility of outdoor advertising allows the advertiser’s message to stand out. Further, even those who no longer commute still spend time on the road in order to run errands, attend events or dine. The cost of putting up a billboard ranges anywhere from $1,000 to $3,000 a month depending on the company, the road the billboard is on, the traffic, and the market. If this sounds like a lot of money to you, think again – because a running a full-page newspaper advertisement for a single day in any major newspaper will cost you the same amount – and it is not nearly as effective. 1. Billboard advertising grabs the attention of potential customers like no other form of advertising can. 2. One of the most cost-effective mediums of advertising 3. Brand awareness and strong name recognition  4. Colorful, creative and eye-catching ads have more impact 5. Reaches out to thousands of people on a daily basis 6. Targets a specific audience according to location 7. Ads are not lost in the mix of competitors and editorials 8. Messages are delivered continuously and frequently 9. Directs potential clients and customers to your place of business. These are but a few of the many advantages that billboard advertising has. With so many benefits, it’s no wonder that so many business owners are using billboard advertising today. From putting them up at airports to sticking them on car or truck wraps to even showcasing them at movie theatres, billboard advertising makes it possible for you to advertise your products and services anywhere.

Federal Reserve Bank

Federal Reserve Bank In this essay I would like to discuss why the Fed changes interest rates, what economic mechanism uses interest rates to affect the economy, if the Fed's announcements really make a difference, and what the Fed's most affective monetary policy is.The first question to be answered is why does the Fed change interest rates. The Fed cannot control inflation or influence employment directly so instead, it affects them indirectly, by raising or lowering interest rates. Interest rates play an important role in the general business cycle and financial markets. When rates rise, consumers spend less, corporate profits are reduced, the stock market declines, and unemployment goes up. The Fed uses monetary policy as the economic policy to change interest rates and try to regulate consumer spending, the stock market, and unemployment.Do the Fed's announcements really make a difference? Yes, when the Fed makes an announcement it has an effect on people.English: Interest rates as set by the Bank o f Engl...When the interest rates go up, consumers will buy less and when rates go down consumers will usually buy more. When rates go up it is usually good news, and people will go get new mortgages on their houses, or maybe even buy a new house or car thus helping the economy.In conclusion the Fed's only way to control inflation or influence employment is by affecting them indirectly with monetary policy by raising or lowering of interest rates. The federal-funds rate is the main monetary policy instrument of the Fed and it does not directly impact the economy but when the news of lower or higher interest rates is spread, consumers react and therefore the economy reacts to their changed spending habits.

buy custom The Lord of Flies essay

buy custom The Lord of Flies essay At the beginning of the novel we can see the fair boy and the fat boy. They discussed the plane crash occurrence while wondering where the plane and the pilot had disappeared. During the conversation, the fat boy asks the fair boys name. We learn that the fair boy is called Ralph. Ralph is not interested in knowing the fat boys name. They imagine that the rest of the children in the plane might have been saved and could be anywhere in the jungle. The two walk for quite some distance until they get to the shore. Ralph gets off his clothes and goes swimming as the fat boy follows him sluggishly. He admits to Ralph that people call him Piggy, but he asks him to keep it a secret. During the swimming, Ralph boasts about his father who works in navy and who will come rescue them. Piggy, however, explains that before the crash, the pilot had told him that an atomic bomb had exploded, and everybody died. After swimming while they put on their clothes, they find a white shell that produces some sounds when blown into. Some small and naked children appear from the woods. Piggy goes to these children and tries to figure out their names. He gets to know the twins Eric and Sam and another young child, Johnny. Ralph does not care about them and continues to blow into the shell. Their leader commands them all to stand in a queue. Before long, one of the boys in the black robes faints and their leader assumes. Piggy does not ask names of this group but makes it known that names are very important. Ralph takes advantage of the situation and informs everyone that Piggy is called Piggy. From here, we meet Jack Merridew the tyrant, Maurice, the boy who smiles a lot, Roger the secrecy boy, Simon the boy who fainted, Bill, Robert, Harold and Henry. Ralph and Jack are the aspirants for the leader position. Ralph emerges the winner. Then he appoints Jack as the head of the choirboys. Ralph, Jack and Simon decide to go exploring the area but reject Piggy from accompanying them since he could not walk fast. On this walk, Jack is unable to kill a pig but swears to do so one day. Ralph calls a meeting using his leadership authority as the chief. He addresses the boys and informs them of the rules that will help them to become organized. He insists that anyone who wants to speak should raise his hand. While speaking, one is required to hold the shell. The boys who were excited to see the ones who will be punished for violating them accepted these rules. A small boy asks for the shell so that he is allowed to talk. Everyone laughs at him, but Piggy comes to his secure an demands that he is heard. He cautions everyone that there is a mysterious snake, beastie in the island. The other boys laugh at him again saying that it is his own imagination. Jack decides that they should look for it, in case it is there. Ralph orders to prepare the fire to help the rescuers locate them. A problem emerges that there is no way of starting the fire. Jack gives an idea about rubbing two sticks and the use of Piggys glasses to produce fire. As this is going on, Piggy is pissed of f by the fact that the other boys do not want to listen to him. He grabs the conch shell to speak, but the smoke from the fire becomes too much and he gets breathing problems. After some time has passed we can see Jack obsessed with killing a pig through tracking down pigs droppings, and sniffing the air all the time. He fails to kill a pig yet again and tries to take his frustrations out on Ralph and Simon who are building the shelter out of leaves. Jack suggests face painting to scare the animals. Simon goes to the jungle to fetch fruits with the younger boys. He comes to an area with woven mats where he crawls to them and relaxes there until evening. As time passed, the little ones developed a habit of playing together while the older boys went hunting for pigs and others kept the signal fire. These two groups have grown separately where we see Henry hanging out with Percival and Johnny the young boys. Roger gets angry and follows Henry throwing stones at him not missing purposefully. Jack goes ahead with painting of the mask and orders the boys to go along with him to the woods. Back in the lagoon, Ralph, Piggy and Simon swim with Maurice. Piggy suggests that they make a sundial, but they ignore him. Ralph then spots a ship and everyone get excited. The worst thing is that the signal fire had gone out during the excitement. The ship disappeared (William, 1962). A group of the boys led by Jack were chanting songs while carrying a dead pig from the mountain. Jack takes the opportunity to explain how they managed to kill the pig. After the explanation, Ralph asked why they let the fire go off. Piggy gets involved and accuses them of being irresponsible like 12-year-old boys. Jack feels offended and punches Piggy in the face. This causes one of Piggys lenses to break leaving him with a one-eye vision. Jack apologizes for his actions later. Ralph orders the choirboys to light the fire once again. This upsets Piggy since his glasses have to be used again. All this time the boys were only feeding on vegetables and fruits. The smell of the roasted meat was a real delicacy. Jack refused share the pig with Piggy accusing him of nnot helping in the hunting. Simon decides to give Piggy a share of his meat that upsets Jack so much. Ralph decides to call a meeting by sounding the conch shell. He reminds the boys of the rules that had been set. He reminds them to keep the fire going. He also addresses the fear of the snake and that of dying. An argument crops up about the beastie walking at night. When Piggy stands up to talk, someone calls him a fat slug. The meeting is disintegrated, and Jack leaves to go look for the beastie. Ralph tries to get everyone together and swears that if he blows the conch shell and no one responds, he resigns. Something weird happens where Sam and Eric who were tending the fire they see a body in the darkness of the wind. This follows screams and the twins wake up Ralph. Jack, Ralph and other big boys head off to find it. They decide to go to the tail of the Island where they call it the castle. They get to the rocks and Ralph decides to get in as he is the Chief. After a long search, there is no beast they meet. The boys go on playing in the rocks until Ralph realizes that the signal fire is off again. They quit playing and follow them to the mountaintop. The boys then rest and eat some of the fruits they had found. Roger notices pig wastes and alerts the other boys. Suddenly a huge boar emerges from the bush and Ralph sticks his spear in its snout before falling out. Jack takes after it, but later his arm is wounded. This excitement extends as one of the boys Robert plays the boar and is followed by other boys with spears in their hands. As it gets dark, most boys go ahead, leaving Ralph, Jack, and Roger behind. As the wind blows through the trees, a creature lifts its head toward the boys from the bush. Boys run away screaming again. The next morning the boys inform Piggy of the beast. Ralph explains that everyone is scared, and no one can go to the mountaintop to keep the fire going. Jack blows the conch shell to hold a meeting to take control of the situation. He informs them that Ralph is not fit to continue. No one supports his views and this upsets him. Ralph then comes up with a new idea to build a fire signal at the beach. After this, they realize that Maurice, Bill, Roger and Robert had disappeared and did not help build the fire. The only ones left are the twins and Simon. Meanwhile, Jack and his group of hunters develop strategy how to kill more pigs while leaving the pigs head for the beast. This was to let the beast not disturb them. They meet a group of pigs and manage to kill one. Jack announces to everyone that they will be having a feast and everyone is invited. Buy custom "The Lord of Flies" essay

The Deans Welcome Learning Technique Essay Example | Topics and Well Written Essays - 500 words

The Deans Welcome Learning Technique - Essay Example There were various concentrations I can pursue within the MBA program. The marketing concentration would provide the greatest value for me. In today’s business environment where consumers have so many options marketing is the business function that can provide differentiation for a company. The marketing field provides the tools needed for companies to expand beyond the domestic marketplace into international waters. In the job marketplace I’ve notice that there are lots of high paying job positions for people in the field of marketing. In 2008 the average salary of marketing executive was $175,000 (Salary, 20009). Marketing is a branch of business administration that allows people to make decision that impact the most important variable of an enterprise which is its total sales. An education in marketing at the graduate level will provide me a career path that involves creativity, working in the field, interpersonal communication, and evaluation of information among many other aspects. It is a concentration that opens up many work opportunities. An individual pursue an MBA degree must have certain managerial competencies to become an effective leader. The program at UOP online will enable students do develop these skills and competencies that are necessary to become a successful manager. The MBA Matrix included in the Dean’s Welcome provides an illustration of 24 managerial competencies. A self-evaluation of my personal abilities in relation to this list would reveal that some my strengths are communication skills, global mentality, critically thinking and teamwork. I like to write and communication with people in formal and informal settings. In the business world technical report skills are important they are utilize in our daily activities at work. Since the start of the convergence era which commenced at the turn of the century globalization has become more important than ever. The internet and the arrival of broadband connections

Full Costing and Variable Costing Essay Example | Topics and Well Written Essays - 2000 words

Full Costing and Variable Costing - Essay Example Cost Accounting: A 12 Managerial Emphasis. 12th ed. Prentice Hall. 12 Elliott Taylor, 2011. Full-Costing Income Statement vs. Variable-Costing Income Statement. [online] Available at [Accessed 25 December 2011] 13 Jae Shim, Joe Seigel, 2011. Schaum's Outline of Managerial Accounting. 2nd ed. McGraw-Hill. 13 John Simms, 2008. The Variable Costing Income Statement for External Reporting. VDM Verlag. 13 Noah P. Barsky, Anthony H. Catanach, 2004. Management Accounting: A Business Planning Approach. South-Western College Pub. 14 Steven M. Bragg, 2011. Cost Accounting Fundamentals: Essential Concepts and Examples. 2nd ed. Accounting Tools. 14 Executive Summary Full Costing and Variable Costing are two common approaches to cost keeping employed at the management accounting level in various firms across the globe. Both approaches have their pros and cons and making a choice between the two is solely dependent upon the practices of the firm, its approach to create shareholder value and the m indset of its employees. In terms of the treatment of different types of cost, there is only one difference between the two approaches under consideration. The Manufacturing Overhead component of cost is treated in a different manner under both the approaches. The fixed component of the Manufacturing Overhead is absorbed by the product as it is treated as a product cost in Full Costing approach while the same component is treated as a period cost under the Variable Costing approach. This different treatment of the Fixed Manufacturing Cost, poses a positive effect on the bottom line of the company in the Full Costing Approach, as the cost incurred on the goods not sold is not deducted from the revenues generated during the relevant period. When it comes to Variable Costing, the costs incurred over the manufacturing of all the produced items are deducted from the revenues of the relevant period. This tends to shrink the company bottom-line for the immediate period. These two approache s thus influence the mindset of the shareholders and stakeholders of the company. The type of approach to costing adopted by the company shall also depend on the industry that it operates in and the shareholder anticipations as well. Introduction The ultimate objective of the commencement of any business is to generate profits. A simple equation that generates the bottom line of any business entails the deduction of costs from revenues of the company. Revenue calculation is not a Herculean task, and thus there are not a lot of distinguished approaches that can be used to calculate the revenue of the company. However costing is a much more complex and complicated component of the formerly mentioned equation. There are various approaches utilized by management accountants and financial analysts across the globe for the computation of the cost components. Each component has its own justification and rationale and this paper will be specifically aimed at discussing two of the most utili zed approaches to costing namely Full Costing and Variable Costing (Garrison, Noreen, Brewer, 2009). Main Findings In general, no matter whichever approach to accounting is used by the accountants for the treatment of the cost factors in the financial